Size guide
Figures below come from the manufacturer grid that ships with the tank line. Bust is measured flat and doubled, hem width is the widest point of the flare, length runs from the shoulder seam to the bottom edge.
The grid
Below is the chart as published for the tank line. Figures are garment measurements in inches, not body measurements.
| Size | Bust (in) | Cuff Length (in) | Hem Width (in) | Length (in) |
|---|---|---|---|---|
| XS | 35 | 20 | 45.3 | 19.2 |
| S | 36.6 | 20.7 | 46.9 | 19.7 |
| M | 38.2 | 21.3 | 48.4 | 20.2 |
| L | 40.5 | 22.2 | 50.8 | 20.7 |
| XL | 43.7 | 23.4 | 53.9 | 21.1 |
| XXL | 46.9 | 24.6 | 57.1 | 21.6 |
| XXXL | 50.4 | 26.2 | 60.6 | 22.1 |
Reading it on a loose cut
These tops are cut loose on purpose, so the bust number runs well ahead of a body measurement. Buying down a size to get a closer fit works against the shape, since the flare at the hem is what keeps the fabric off the waist.
The practical version: measure the fullest part of your bust, then look for a chart figure three to five inches larger. That gap is the drape. If you land between two rows, the smaller one gives a closer body and the larger one gives more swing at the hem.
Length is measured from the shoulder seam straight down to the bottom edge, so it includes the shoulder itself. The oversized tee sets run several inches longer than the tanks through the body, which is what makes them work over bike shorts.
What does not change
Fit does not vary between colourways of the same cut. A medium in one shade set measures the same as a medium in another, so once a cut fits, colour is purely a colour decision. Fit does vary between cuts, which is why the chart appears on every product page rather than only here.